Non Destructive Test Pile Dynamic Testing

Non-Destructive Test

How to measure your pile foundation quality? Can you guarantee your pile foundation can sustain design load without any excessive settlement? Are your piles capacities too high or over designed? Do you want to conserve pile foundation cost?

Certified by engineers from PDI (Pile Dynamics Inc.) USA since 1995, we have been conducting dynamic testing (PDA and PIT) and static loading (Axial, Tension, Lateral) on pile foundations for various off-shore and on-shore projects. We also provide other methods of pile testing such as Crosshole Sonic Logging to determine the condition of a bored pile. Other than dynamic testing, we’ve also done many static loading test
For more information or general inquiries, feel free to get in touch today. Whatever the job, we’ve got you covered. Contact us now.

Dynamic Load Test

Cross-hole Sonic Logging

Cross-hole Sonic Logging is used as a quality assurance testing of newly placed drilled cast piles to determine the condition of subsurface piles whether there are defects or not. This method also provides the extent, nature, depth and approximate lateral location if there are defects detected.
Equipment : Olson Instrumentation
Capacity : up to 50 meters

Pile Driving Analyzer (PDA)

High Strain dynamic testing of a pile to estimate the ultimate capacity of driven pile or bored pile. This method can also be used for field pile drivability study (during driving) and rough detection of any defect or damage on piles.
Equipment : Pile Dynamics, Inc. (PDA type 8-G, PAX, and PAK)

Pile Integrity Test (PIT)

Low Strain dynamic testing of a pile to detect whether there are defect or damage on a pile and give the subsurface profile of a pile (Only for Bored Pile)
Equipment : Pile Dynamics, Inc. (Pile Integrity Tester)

Static Load Test

Axial Load Test

An insitu type of loading test to determine the actual ultimate bearing capacity of deep foundation or to test the pile response when it is loaded based on the planned axial bearing capacity. Mainly, there are two methods for conducting Axial Load Test. Using a reaction pile or using counterweight. For this method we provide test readings, test setup, and data analysis.

Lateral Load Test

An insitu type of loading test to determine the actual lateral capacity of deep foundation or to test the pile response when it is loaded based on the planned lateral capacity. Mainly, there are two methods for conducting Lateral Load Test. Using a reaction pile or using counterweight. For this method we provide test readings, test setup, and data analysis.

Tension Load Test

An insitu type of loading test to determine the actual tension capacity of deep foundation or to test the pile response when it is loaded based on the planned tension capacity. Mainly, there are two methods for conducting Lateral Load Test. Using a reaction pile or using counterweight. For this method we provide test readings, test setup, and data analysis.